Security Cameras Passive Baluns Passive Video Balun w/DC Power Connection (2pc) Okina VPB110TK

Passive Video Balun w/DC Power Connection (2pc) Okina VPB110TK SKU: 501546

1+
$13.50
1+
$13.50
1+
$13.50

Warranty: 1 Year

  • 30-day money back guarantee
  • No restocking fee
  • Safe SSL encrypted shopping

Description

Mini Passive Video Filter Balun
Passive Video Balun with Power Connector, Model: VBU110TK
Features:
  • Uses an Unshielded Twisted Pair cable (UTP), like CAT5, to transmit full motion camera video signal in color up to 1000ft / 300m, and in B/W up to 2000ft / 600m.
  • No power required for video balun
  • Surge / Lightning Protection
    10/700 μs Pulses: 2KV
    Standard: IEC61000-4-5
  • ESD : Electrostatic Discharge Protection
    Contact Discharge: 6KV / Air Discharge: 8KV
    Standard: IEC61000-4-2
  • Wave / Interference Rejection & Noise Filter
    Built-in Filter: 0~6HMz with Extra Interference Rejection
    <60db
  • DC Power Lead: 12V~24V DC

 
Application Diagram:
 

Power+: 3 Conductors
Power -: 3 Conductors

Video+:1 Conductor
Video-: 1 Conductor

Cat.5E/6 is 24AWG for each conductor. If you put 3 conductor
together, it will be similar to 18 ~ 20AWG. This will reduce voltage drop.


Specification:

Model Number
VBU110TK
Video Input / Output
BNC male cable & DC male/female to screw/push-in terminal
Surge / Lightning Protections Video Output Protection
2KV (common mode), 10/700µs
IEC6100-4 2/1955 (GB/T 1726, 5-1999)
Video Input Protection
2KV (different mode), 2KV (common mode)
IEC6100-4 2/1955 (GB/T 1726, 5-1999)
Video Input Protection for Over Current
100mA
Electrostatic Discharge Protection (ESD)
Contact Discharge: 6KV / Air Discharge: 8KV
Standard: IEC61000-4-2
Wave / Interference Rejection &
Noise Filter Protection
Built-in Filter: 0~6HMz with Extra
Interference Rejection <60db
Video Signal
1V p-p, 75 Ohms
Transmission Distance
Color 1000ft / 300m / B/W 2000ft /
600m
Cable
UTP/ Twisted Pair CAT5E/6 (AWG24)
DC Power Lead
12V~24V DC

How does a balun work?
Baluns are used to convert between "Balanced and Unbalanced" electrical signals.
Baluns work by transforming the original unbalanced (video/power/data/etc) signal to a balanced frequency used by a different cable, like CAT5 UTP. Not only does this reduce interference, but it also allows you to transmit a signal much longer than the original application would allow. Baluns are always utilized in pairs. One balun is needed to convert the original signal to a new frequency, and another balun is used at the other end to revert to the original frequency.

"Passive" Video Baluns do not require power, and can extend a signal up to 2000ft (B/W)
"Active" Video Baluns require power, but can extend a signal up to 8000ft (B/W)

1+
$13.50
1+
$13.50
1+
$13.50

Warranty: 1 Year

  • 30-day money back guarantee
  • No restocking fee
  • Safe SSL encrypted shopping